Car Hid HB4/9006 300W 6000K White Digital High Power Fog Lam..More

Features:
Suitable for Vehicle Headlight and fog lamp
Input voltage : DC 9-16 V , Start Current < 7.5 V , 3A/4.2A .
Smart-scale CPU mode, Unique frequency conversion technology, low start current, fast bright, more safer.
CANBUS and EMC two decording method innovative combined, and loop signal detection,can pass 95% cars.
With FBI HID Xenon Bulb, more bright and longer lifetime.

Description:
Digital Hid Kit 300 watts with wiring kit. Installation Note Turn off the ignition and remove the keys. As a safety precaution, Make sure that the engine bay has cooled down properly before starting the installation process. Be careful not to touch the bulbs with your fingers, as this may damage the bulbs. also be careful to avoid crushing or cutting the bulbs or bulbs base. Fully examine the connection of the contact point, parts, and the wires, as faulty or loose connection may cause lighting problems. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. you may be required to drill an approximate 25mm hole into the back of the resin or rubber headlight dust cover. Be careful to avoid burns during installation of the components, especially after turning on or off the vehicle s lighting. TROUBLE SHOOTING TIPS Reverse the polarity of the signal wires going from factory headlight connection. Make sure that the wires are connected securely and the ground wires are properly making contact with the chassis. Switching components from side to side to isolated the pproblem. If the lighting flashing, can not bright, warning light on then maybe it need CANBUS, Can add the canbus cancellor or change to the canbus ballast.