Car Headlight and Wind Shield Restoration Oci Glue Butyl Se..More

Features:
Hot melted Butyl Glue For Headlight and Car Wind Shield. Multipurpose Glue, Water Proof
Long Lasting.Easy to Remove and Re fixing, Rubber Sealant is use for the side of car doors column it can effectively keep out the wind, prevents the water leakage and lower the noise outside the car.
Long Lasting Recommended for re-sealing headlights after a retrofit or for installation between the glass and metal/llastic areas of automotive headlights/windscreen. It will remain permanently sealing and waterproofing.
Characteristic excellent adhesion Excellent weatherability, chemical corrosion resistance. Sealing, shock absorption, protection free of solvent, no shrinkage, no toxic gas, convenient construction
type Environmentally friendly and non curing double sided self adhesive waterproof sealing tape, Material: Synthetic Butyl Rubber. Waterproof.

Description:
Water and air tight high-quality butyl sealant rope Easy, cold application by hand Permanent, flexible and watertight seal Effective application and workability over a wide range of temperatures (+30 °F to +140 °F) Rugged service performance and resistance over a wide range of temperatures (-40 °F to +180 °F) Excellent mechanical properties and chemical resistance Excellent chemical and mechanical bond adhesion to concrete surfaces Excellent aging characteristics will not shrink, harden or oxidize Self-sealing properties when punctured

♥Features:

â–¶ Material: Synthetic Butyl Rubber

â–¶ Color: Black

♥Easy Installation:

â–¶ First: Clean the edge of the car door/windshield/headlamp cover with neutral detergent and wait until dry.

â–¶ Second: Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.

※Please Note:

When properly positioned, the tape should be continuously attached to the pinch weld before you seal it with the other coupling part. The purpose of the sealer is to provide for a watertight seal. In cold weather conditions it is best to warm the tape prior to attempting the installation, as this will soften the tape allowing for better workability.